Kia Sorento: Inspection
| 1. |
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
|
| 2. |
Reconnect the PCV valve to the vapor hose.
|
| 3. |
Inspect the PCV vlave operation.
|
| 4. |
If the vacuum is not felt, clean or replace the vapor hose.
|
Rear Wheel Speed Sensor Removal
4WD only
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Safe Exit Warning (SEW): (if equipped)
While your vehicle is stopped, Safe Exit Warning may help you avoid a collision using ...
Front Oil Seal Repair procedures
Replacement
1.
Remove the crankshaft damper pulley.
(Refer to Drive Belt System - "Crankshaft Damper Pulley")
...