Kia Sorento: Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Disconnect the solenoid valve connector (A).
|
| 4. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
| 5. |
Check that the resistance is within the specification.
|
Front Hub / Knuckle / Tone Wheel Disassembly
1.
Remove the brake disc (B) from the knuckle assembly (A).
Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)
...
Glove Box Lamp Repair Procedures
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the glove ...
Components and Components Location
Components
1. Front oil seal2. E-CVVT cover plug 3.
E-CVVT cover4. Variable force solenoid valve (VFS)5. Timing chain cover 6. E-CVVT plug
...