Kia Optima Manuals

Kia Sorento: Installation - Knock Sensor (KS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS) / Installation

  
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
1.
Install in the reverse order of removal.
Knock sensor installation bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mechanical Syst...
Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance wi...
See also:

Rear Shock Absorber Installation
1. Installation is the reverse of removal.    After checking the distance 45 ...

Smart key
Equipped with modern proximity sensor technology, the Kia Sorento smart key allows you to lock, unlock, or start your vehicle effortlessly without removing the fob from your pocket or bag. ...

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026