Kia Sorento: Installation - Torque Converter Control Solenoid Valve (T/CON_VFS) - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Installation

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) / Installation

1.
Install in the reverse order of removal.
  
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. (Re...
26 Brake Control Solenoid Valve(26/B_VFS)
26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake....
See also:

Troubleshooting
Vehicle inspection SYMPTOM CHART Symptom Suspect Area Remedy (See page) Squeak or grunt-noise from the front suspension, occurs more in cold ambient t ...

Forward/Side/Reverse Parking Distance Warning operation
Parking Safety button ...

Crankshaft Disassembly
   • Use fender covers to avoid damaging painted surfaces. • ...

Copyright © xm.ksmanual.com 2014-2026