Kia Sorento: Torque Converter Control Solenoid Valve (T/CON_VFS)
Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS)
Torque converter control solenoid valve (T/CON) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the torque converter.
1.
Install in the reverse order of removal.
...
Output Speed Sensor Installation
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
...
Specifications
See also:
Idle Stop and Go (ISG) system
The Idle Stop and Go system helps optimize urban fuel efficiency by automatically shutting down the engine of your
Kia Sorento whenever the vehicle comes to a complete halt during traffic congest ...
Alternator Removal
1.
Disconnect the battery negative terminal.
2.
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove th ...
Interior overview
1. Driver position memory system button
2. Inside door handle
3. Power window switch
4. Central door lock switch
5. Power window lock button
6. Outside rearview mirror control
7. Outside rearv ...
Copyright © xm.ksmanual.com 2014-2026 - 0.0257