Kia Sorento: Installation - SS-B Solenoid Valve(ON/OFF) - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Installation

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF) / Installation

1.
Install in the reverse order of removal.
  
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. (Re...
Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals....
See also:

Transfer Fluid Inspection
   • Transfer oil should be inspected and refilled every 60000 km (40000 mile) / 4 year. ...

Circuit Diagram
...

Seat belt restraint system
WARNING For maximum restraint system protection, the seat belts must always be used whenever the vehicle is moving. Seat belts are most effective when seatbacks are in the upright position. ...

Copyright © xm.ksmanual.com 2014-2026