Kia Sorento: Intake Actuator Description - Blower - Heating,Ventilation And Air ConditioningKia Sorento: Intake Actuator Description

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Replacement
1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. ...
Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates ...
See also:

Operating conditions. Deactivating ISG
Operating conditions The ISG system on your Kia Sorento functions only when a strict set of environmental and mechanical parameters are met: The driver's safety seat belt is sec ...

G-Sensor Calibration
1. Ignition "OFF", connect GDS. 2. Ignition "ON" & Engine "OFF" select vehicle name and ESP system. ...

Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0329