Kia Sorento: Intake Actuator Replacement - Blower - Heating,Ventilation And Air ConditioningKia Sorento: Intake Actuator Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the cowl side trim.
(Refer to Body - "Crash Pad")
3.
Using a screwdriver or remover, remove the crash pad side cover (A).

4.
Disconnect the stopper (B) from the glove box (A).

5.
Disconnect the air damper (A) from the glove box (B).

6.
Disconnect the pins (A) and then remove the glove box (B).

7.
After loosening the mounting screws, then remove the crash pad side garnish [RH] (A).

8.
After loosening the mounting screws, then remove the crash pad under cover (A).

9.
After loosening the mounting screws, then remove the glove box housing (A).

10.
Disconnect the glove box lamp connector (A).

11.
Disconnect the connector (A) and then remove the intake actuator (B) after loosening the mounting screws.

12.
Install in the reverse order of removal.
Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates ...
Rear Air Conditioner
...
See also:

Component Location
[Engine Room] 1. Receiver-drier 2. Condenser 3. Ambient temperature Sensor 4. Compressor 5. Discharge Hose 6. Suction & Liquid Tube Assembly 7. Servic ...

Keys
The key system for your Kia Sorento seamlessly integrates mechanical emergency access with advanced remote keyless entry functions, giving you full control over vehicle security and convenience f ...

Alternator Inspection
Inspection Inspect Rotor 1. Check that there is continuity between the slip rings (C). ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0498