Kia Sorento: Manual heating and air conditioning
The heating and cooling system can be controlled manually by pressing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of buttons or knob(s) selected.
1. Start the engine.
2. Set the mode to the desired position. For improving the effectiveness of heating and cooling;
- Heating: 
- Cooling: 
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
Mode selection

The mode selection button controls the direction of the air flow through the ventilation system.
The air flow outlet port is converted as follows:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Components and Components Location
Component and Component Location
Rear Door
1. Rear Door Delta Inner Cover2. Rear Door
Trim3. Rear Door Modu ...
Rear A/C Unit Removal and Installation
Removal
1.
Recover refrigerant by using the refrigerant recovery/recycling/charging machine.
(Refer to Air conditioning Syste ...