Kia Sorento: Oil Level Gauge & Pipe Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Removal and Installation

1.	Remove the oil gauge(A).

2.	Remove the intake manofold. (Refer to Intake And Exhaust System - "Intake Manifold")

3.

Remove the oil level pipe(A).

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

4.	Install in the reverse order of removal.

Oil Pressure Switch Inspection

1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. ...

Intake And Exhaust System

...

See also:

Operation and Leakage Check
Check all of the following items: Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive. If the brakes do not ...

SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

Circuit Diagram
...

Manuals list

Copyright © xm.ksmanual.com 2014-2026