Kia Sorento: Oil Level Gauge & Pipe Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Removal and Installation

1.	Remove the oil gauge(A).

2.	Remove the intake manofold. (Refer to Intake And Exhaust System - "Intake Manifold")

3.

Remove the oil level pipe(A).

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

4.	Install in the reverse order of removal.

Oil Pressure Switch Inspection

1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. ...

Intake And Exhaust System

...

See also:

Blower Motor Inspection
1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a know ...

Components (1)
1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring 4. Seat Belt Pretensioner (BPT) 5. Front Side Impact Sensor (FSIS) 6. Side Airbag (SAB) 7. Passenger Airbag (PAB) ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.0309