Kia Sorento: Overhead Console Lamp Removal
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the mounting screws (2EA).
And then remove the overhead console (A).
|
| 3. |
Remove the overhead console lamp (B) from the head lining after
disconnecting the sunroof switch connector and map lamp switch connector
(A).
|
| 4. |
If the bulb only should be replaced, replace the bulb after removing
the lens.
|
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch....
Overhead Console Lamp Inspection
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening 2 screws....
Overhead Console Lamp Installation
See also:
Purge Control Solenoid Valve (PCSV)
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when the ECM groun ...
4WD ECU Circuit Diagram and Connector
4WD ECU Connector
Pin
Function
1
MOTOR A
2
MOTOR B
3
LOCK MODE SWITCH (Input)
4
-
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0496