Kia Sorento: Parking Assist Sensor Removal
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Rear Parking Assist System / Parking Assist Sensor Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
|
| 3. |
Disconnect the connector (B) from the parking assist sensor (A).
|
| 4. |
Pull out the sensor (A) by opening the sensor holder (B) out.
|
Parking Assist Sensor Component
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the rear bumper cover.
3.
Connect the negative...
Parking Assist Sensor Installation
See also:
Front fog light operation: (if equipped). High Beam Assist (HBA)
Front fog light operation: (if equipped)
Fog lights are designed to improve visibility in fog, rain, or snow.
...
Troubleshooting
Symptom
Possible cause
Remedy
One lamp does not light
(all exterior)
Bulb burned out
Replace bulb
Socket, wiring or ground faulty
...
Fuel Tank Installation
1.
Install in the reverse order of removal.
Fuel tank band installation
bolt:
44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft)
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0324