Kia Sorento: Photo Sensor Replacement - Air conditioning System - Heating,Ventilation And Air ConditioningKia Sorento: Photo Sensor Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Photo Sensor Replacement

1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from the center of the defrost nozzle after disconnecting the connector (B).

3.
Install in the reverse order of removal.
Photo Sensor Inspection
1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and ...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, an...
See also:

Engine Control Module (ECM) Removal and Installation
Removal 1. Perform the oil pressure characteristics backup procedure with the KDS when replacing with a new Engine Control ...

Installation
   ...

Transaxle Control Module (TCM) On Vehicle Inspection
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connec ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0572