Kia Sorento: Ambient Temperature Sensor Description
Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, and decrease with higher temperature.
The sensor output will be used for discharge temperature control, temperature
regulation door control, blower motor level control, mix mode control and in-car
humidity control.
If the ambient temperature is below 1.0°C (33.8°F), the A/C compressor
will stop.
The compressor will operate manually.
|
Photo Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of the defrost nozzle af...
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch ON.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
3.
Disconne...
See also:
Normal maintenance schedule
The following maintenance services must be performed to ensure good emission
control and performance.
Keep receipts for all vehicle emission services to protect your warranty. Where
both mileage an ...
Identification Number Locations
Identification Number Description
Vehicle Identification Number
1.
World Manufacturer Identifier
(WMI)- 5XY : MPV(Multipurpose Passenger Vehicle)/SUV(Sports Utility Vehicle)/RV ...
Engine Control Module (ECM) Adjustment
•
After replacing the ECM of the vehicle with the immobilizer, the
following procedure must be performed.
1)
[If installing a used ECM]
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026