Kia Sorento: Power Door Mirror Actuator Inspection
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver door module.
(Refer to Body - "Front door")
|
| 3. |
Disconnect the connector from the mirror.
|
| 4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn Signal Lamp
BSD Warning Lamp
Mirror Folding
|
Room Lamp Removal
[General]
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver
t ...
Fuel Tank Air Filter Removal and Installation
Removal
1.
Disconnect the negative ( - ) battery terminal.
2.
Remove the rear ...
Fuel Pressure Control Valve
Fuel Pressure Control Valve is installed on the high pressure fuel pump
and controls fuel flow flowing into the injectors in accordance with the ECM
signal calculated based on various engine ...