Kia Sorento: Room Lamp Removal
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Room Lamp Removal
[General]
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver
then replace the bulb.
|
| 3. |
Loosen the fixing screw (2EA) and disconnect the 4P connector.
And then remove the room lamp assembly (A).
|
[Sunroof]
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver
then replace the bulb (B).
|
| 3. |
If it is necessary to replace the lamp assembly, remove the room
lamp (A).
|
1.
Remove the room lamp assembly then check for continuity between
terminals.
[Sunroof]
[General]...
Room Lamp Inspection
1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lamp lens after assembling the bulb....
Room Lamp Installation
See also:
SRS Control Module (SRSCM) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boot.
2.
Using the alignment marks (D) made during disassembly as a ...
Circuit Diagram
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0355