Kia Sorento: Power Tailgate Latch Removal
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer to the Body - "Tailgate")
|
| 3. |
Remove the tail gate latch assembly (A) after loosening the mounting
bolts.
|
| 4. |
Loosen the PCU (Power Closing Unit) mounting nuts.
|
| 5. |
Disconnect the power tailgate latch connector (A) and PCU connector
(B).
|
| 6. |
Remove the power tailgate latch & PCU assembly (A).
|
Power Tailgate Unit Installation
1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) battery termin...
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative (-) battery ...
See also:
Transaxle Control Module (TCM) Removal
When replacing the TCM, the vehicle equipped with the immobilizer
must be performed procedure as below.
[In the ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Air bag Warning Ligh ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026