Kia Sorento: Power Tailgate Latch Installation - Power Tailgate Module - Body Electrical SystemKia Sorento: Power Tailgate Latch Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Installation

1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative (-) battery terminal.
Power Tailgate Latch Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate trim (A). (Refer to the Body...
Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS 1. Check the power Tailgate module input/output value by using the GDS. If the operation of power Tailgate module is abnormal, replace ...
See also:

Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...

Installation
1. Install the multifunction switch. 2. Install the clock spring and steering wheel. 3. Install the steering co ...

Opening the fuel filler door
Turn the engine OFF completely and ensure the vehicle is safely parked before attempting to refuel. Make sure the driver's door is unlocked, as the fuel door locking mechanism operates in s ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0555