Kia Sorento: PTG Spindle Installation - Power Tailgate Module - Body Electrical SystemKia Sorento: PTG Spindle Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Tailgate Module / PTG Spindle Installation

1.
Connect the PTG spindle, bracket and connector.

Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)

2.
Install the tailgate trim and Luggage side trim.
3.
Connect the negative (-) battery terminal.
PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate") ...
Windshield Wiper/Washer
...
See also:

Fuel Pressure Test (Low pressure system)
1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line") ...

Repair Procedures
Wheel Alignment Repair Procedures 1. When using the wheel alignment tester to check the wheel alignment, align the lift's vehicle ...

Refrigerant Line Removal and Installation
Removal Suction & liquid hose assembly ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0941