Kia Sorento: PTG Spindle Removal
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Tailgate Module / PTG Spindle Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the tailgate trim and Luggage side trim.
(Refer to the Body - "Tailgate")
|
| 3. |
Disconnect the power PTG spindle connector (A).
|
| 4. |
Using a screwdriver (A), lift up slightly the socket clips (B)
of both ends on the lifer (D), and then remove the PTG spindle from
the bracket (C).
|
| 5. |
If it is necessary, remove the nuts and replace the PTG spindle
bracket (A).
|
1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) battery terminal....
Anti-Pinch Strip Installation
1.
Connect the PTG spindle, bracket and connector.
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
...
PTG Spindle Installation
See also:
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Trunk Trim Replacement
Luggage Side Trim Replacement [7 seats]
...
Speakers Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
s ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0373