Kia Sorento: Rear Blower Resister Replacement
Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Rear Air Conditioner / Rear Blower Resister Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
|
| 3. |
Remove the rear blower resistor (A) after loosening the mounting
screws.
|
| 4. |
Install in the reverse order of removal.
|
Rear Blower Resister Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
resistor must...
Controller
...
See also:
TJ Joint Removal
•
Special grease must be applied to the driveshaft joint.
Do not substitute with anoth ...
Fuel Tank Removal
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
...
Circuit Diagram
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026