Kia Sorento: Rear Oil Seal Installation - Cylinder Block - Engine Mechanical SystemKia Sorento: Rear Oil Seal Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Installation

1.
Install rear oil seal.
(1)
Apply engine oil to a new oil seal lip.
(2)
Using SST(09231-H1100, 09214-2W200) (B) and a hammer, tap in the oil seal (A) until its surface is flush with the rear oil seal retainer edge.

2.
Install the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Install the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Rear Oil Seal Removal
1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate. (Refe...
Ladder Frame Removal
  ...
See also:

Lubricants
Engine Items Specification Capacity Gasoline 3.3 Transfer oil Hypoid gear oil API GL-5, SAE 75W/90 or equivalent 0.68 L (0.18 U.S.g ...

Recommended lubricants and capacities. Recommended SAE viscosity (thickness) number. Vehicle Identification Number (VIN)
Recommended lubricants and capacities. Recommended SAE viscosity (thickness) number To ensure peak performance, thermal stability, and maximum component longevity across all Kia Sorento engine and ...

Manifold Absolute Pressure Sensor (MAPS) & Intake Air Temperature Sensor (IATS) Removal and Installation
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Disconnect the ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0487