Kia Sorento: Rear Oil Seal Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Removal

1.	Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle")

2.	Remove the drive plate. (Refer to Cylinder Block - "Drive Plate")

3.	Rmove the rear oil sela(A).

Drive Plate Removal and Installation

1. Remove the automatic transaxle . (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate (A) and the ...

Rear Oil Seal Installation

1. Install rear oil seal. (1) Apply engine oil to a new oil seal lip. (2) Using SST(09231-H1100, ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S termi ...

Rear Blower Resister Inspection
1. Measure terminal-to-terminal resistance of the blower resistor. 2. If the measured resistance is not within specification, the blower re ...

Side Airbag (SAB) Module Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Si ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026