Kia Sorento: Removal - Inhibitor Switch - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch / Removal

1.
Place the shift lever into the "N" position.
2.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
3.
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
4.
Disconnect the inhibitor switch connector (A).

5.
Remove the shift cable mounting nut (A).

6.
Remove the manual control lever (B) and the washer after removing a nut (A).

7.
Remove the inhibitor switch (A) after removing the bolts (2ea).

Inspection
  ...
Installation
1. Check that the shift lever is placed in the "N" position 2. Install the inhibitor switch (A).  ...
See also:

Overhead Console Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the mounting screws (2EA). And then remove the overhead console (A). ...

Passenger Airbag (PAB) Module Components
...

Anti-lock brake system (ABS)
WARNING ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance bet ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0451