Kia Sorento: Rheostat Inspection
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Lighting System / Rheostat Inspection
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side cover.
|
| 3. |
Remove the lower crash pad switch assembly (A) after loosening
the screws.
|
| 4. |
Remove the rheostat switch connector (A).
|
| 5. |
Remove the rheostat switch (A) from lower crash pad switch assembly.
|
| 6. |
Check for intensity of new rheostat switch. If the light intensity
of the lamps changes smoothly without any flickering when the rheostat
is turned, it can be assumed that the rheostat is normal.
|
Diagnosis With GDS
1.
It will be able to diagnose defects of IPM with GDS quickly. GDS
can operates actuator forcefully, input/output value monitoring and
self diagno...
Hazard Lamp Switch Inspection
1.
With the fog lamp switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the multifunction switch....
Front Fog Lamps Inspection
See also:
Kia Sorento Theft-Alarm System
The anti-theft security alarm system provides robust protection against unauthorized entry into the cabin or cargo
area of your Kia Sorento.
This perimeter protection operates sequentially acr ...
Crankshaft Reassembly
1.
Install the main bearings.
Upper bearings have an oil groove of oil ho ...
Cluster Ionizer Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
Display
Fail description
00 ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0424