Kia Sorento: Seat Belt Pretensioner (BPT) Removal
Kia Sorento (XM, 2011-2015) Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the emergency fastening device cover pad (A). [Driver only]
|
| 3. |
Remove the seat belt after pushing the lock pin with a fiat-tip
screwdriver (B).
|
| 4. |
Remove the door scuff trim. (Refer to the Body group- Interior
trim)
|
| 5. |
Remove the center pillar trim. (Refer to the Body group- Interior
trim)
|
| 6. |
Remove the seat belt upper mounting bolt.
|
| 7. |
Loosen the seat belt pretensioner mounting bolt (A, B) and remove
the seat belt pretensioner.
|
| 8. |
Disconnect the seat belt pretensioner connector.
|
Seat Belt Pretensioner (BPT) Components
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
3.
...
Seat Belt Pretensioner (BPT) Installation
See also:
Trailer brakes
If your trailer is equipped with an independent braking system, verify that it fully complies with all regional
vehicle regulations and is correctly wired, adjusted, and functioning flawlessly be ...
Tire pressure monitoring system TPMS
(1) Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0356