Kia Sorento: Shift Cable Adjustment - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Shift Cable Adjustment

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Adjustment

Adjusting method for T/M control cable
1.
Set room side shift lever and T/M side manual control lever to "N" position.
2.
Connect room side shift lever and shift cable.
3.
Push cable to "F" direction shown to eliminate FREE PLAY.
4.
Tighten adjusting nut (A).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

5.
After adjusting according check to be sure that this part operates surely at each range of T/M side corresponding to each position of shift lever.
Shift Cable Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor switch man...
4 Wheel Drive (4WD) System
...
See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Dis ...

ATF Warmer Removal
1. Drain the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the air cleaner assembly and air duct. ...

Mode Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's side crash pad side cover. ...

Copyright © xm.ksmanual.com 2014-2026