Kia Sorento: Shift Cable Installation

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Installation

1.

Install in the reverse order of removal.

Set shift lever and inhibitor switch manual control lever to "N" position.

Shift Cable Removal

1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Disconnect the...

Shift Cable Adjustment

Adjusting method for T/M control cable 1. Set room side shift lever and T/M side manual control lever to "N" position. 2. ...

See also:

Good driving practices
Never move the gear shift lever from P (Park) to any other position with the accelerator pedal depressed. Never move the gear shift lever into P (Park) when the vehicle is in motion. Be sure ...

Power liftgate: (if equipped)
Power liftgate operating conditions The optional motorized power liftgate system on the Kia Sorento is designed to operate seamlessly when the gear selector is placed in P (Park) while the eng ...

Lane Following Assist (LFA)
Lane Following Assist can detect lane markings or a vehicle ahead on the road and center your Kia Sorento in the lane. Detection sensor Please refer to Detecting sensor(s) for the applicable ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026