Kia Sorento: Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the front seat assembly. (Refer to the Body group- Seat)
|
| 3. |
Remove the seat back assembly. (Refer to the Body group- Seat)
|
Side Airbag (SAB) Module Installation
CVVT Oil Control Valve (OCV)
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Seat Belt Pretensioner (BPT) Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the emergency fastening de ...
Description
BSD is a system that uses two magnetic wave radar sensors attached on
the rear bumper to measure the distance from the following vehicles and provides
the sensing and (visual and auditory) al ...