Kia Sorento: Speakers Inspection - Audio - Body Electrical SystemKia Sorento: Speakers Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Audio / Speakers Inspection

1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector is connected precisely to remove vibration transmitted from body trims and surrounding parts.

(2)
Case Troubleshooting
No.
Case
Inspection/Remedy
1
Trembling sound
1.
Before replacing the speaker, inspect that the mounting screw is installed normally.
2.
After re-installing the speaker, verify that no trembling sound is heard.
3.
When hearing a trembling sound again, replace the speaker with new one.
2
Noise
1.
Check if the wiring connector is connected normally. If not, reconnect the wiring connector.
2.
In case of radio static, check if there is a noise from CD player.
3.
When a noise is heard on turning radio and CD on, replace the speaker with new one.
  
In case there is only radio static, this causes from poor radio reception. Thus the speaker needs no repair and replacement.
3
Poor working
Inspection of the wiring connection between the battery and the speaker
1.
Before replacing the speaker, inspect the wiring connection between the battery and the speaker is normal.
2.
Check the supplying power to the speaker and the resistance, and then inspect the sound quality.

3.
If the speaker works poorly, replace it with new one.

  
-
During dealing of speaker
-
Do not damage the speaker with impact as like a drop and a throw.
-
Be careful not to cover water and oil over the speaker.
-
Caution during dealing of speaker because the material of diaphragm is paper which is easy to be torn by impact and external force.
-
When modifying audio system as customer pleases, this does electric damage to speaker.
-
And, in this case the speakers are not covered by the manufacturer's warranty.
Audio Unit Installation
1. Connect the audio unit connectors and cable. 2. Install the audio unit. 3. Install the center facia panel. ...
Speakers Replacement
Front Speaker 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front speaker (A) after removing th...
See also:

Special Service Tools
Tool (Number and Name) Illustration Application RKE Battery Checker (09954-2P100) Measuring the RKE battery voltage Correction ...

Reverse parking aid function: (if equipped)
When you shift the transmission gear selector into the R (Reverse) position, the outside rearview mirrors on your Kia Sorento can automatically tilt downward to give you a clear view of curbs and ...

Idle Stop and Go (ISG) system
The Idle Stop and Go system helps optimize urban fuel efficiency by automatically shutting down the engine of your Kia Sorento whenever the vehicle comes to a complete halt during traffic congest ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0363