Kia Sorento: Specification - Heated Oxygen Sensor (HO2S) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Specification

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) / Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20
    Heated Oxygen Sensor (HO2S)
    Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance wi...
    Circuit Diagram
    ...
    See also:

    Front Bumper Beam Assembly Repair Procedures
    Removal and Installation Front Bumper Beam 1. Remove the front bumper assembly. (Refer to Bumper (Front) - "Front Bumpe ...

    Filler-Neck Assembly Removal and Installation
    Removal 1. Disconnect the battery negative ( - ) terminal. 2. Open the fuel fi ...

    Front Lower Arm Inspection
    1. Check the bushing for wear and deterioration. 2. Check the lower arm for bending or breakage. 3. Check the ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.06