Kia Sorento: Specifications - Torque Converter Control Solenoid Valve (T/CON_VFS) - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Specifications

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) / Specifications

Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
0 ~ 850
Internal resistance(Ω)
5.1
    Torque Converter Control Solenoid Valve (T/CON_VFS)
    Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter....
    Circuit Diagram
    ...
    See also:

    Troubleshooting
    Troubleshooting Wind noise Suspected causes Correction Door weatherstrip Rea ...

    Temperature Control Actuator Removal and Installation
    Removal Driver's Side Temperature Control Actuator 1. Remove the crash pad lower panel. (Refer to Body - "Crash Pa ...

    Lane Following Assist (LFA)
    Lane Following Assist can detect lane markings or a vehicle ahead on the road and center your Kia Sorento in the lane. Detection sensor Please refer to Detecting sensor(s) for the applicable ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0467