Kia Sorento: Starter Description
Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Starting System / Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting....
Starter Specification
Starter
Item
Specification
Rated voltage
12 V, 1.2 kW
The number of pinion teeth
11
Performance
[No-load, 11 V]
Ampere
...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Valve Body Installation
1.
Install in the reverse order of removal.
•
...
AC Inverter Unit Installation
1.
Install the AC inverter unit.
2.
Install the luggage side trim.
3.
Connect the negative (-) battery terminal ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026