Kia Sorento: Transaxle Oil Temperature Sensor Description - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sorento: Transaxle Oil Temperature Sensor Description

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Description

Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an Negativen Thermal Coefficient(NTC) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.

Transaxle Control Module (TCM) Installation
   When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used TCM]...
Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient Type(NTC) Temp.(...
See also:

Resetting the sunroof. Sunroof open warning
Resetting the sunroof Under specific operating conditions, the electronic control module for your Kia ...

IPM Components
Outer Connector (L / M / N / K) Connector Pin No. Description Active Remark K 1 IMS LIN     ...

Input Speed Sensor Removal
1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0307