Kia Sorento: Troubleshooting - Engine Mechanical SystemKia Sorento: Troubleshooting

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Troubleshooting

Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Worn crankshaft bearings
Loose or out of specification engine flywheel
Replace the crankshaft and bearings as required.
Repair or replace the flywheel as required.
Worn piston rings
(Oil consumption may or may not cause the engine to misfire.)
Inspect the cylinder for a loss of compression.
Repair or replace as required.
Worn crankshaft thrust bearings
Replace the crankshaft and bearings as required
Engine misfire with abnormal valve train noise.
Stuck valves.
(Carbon buidup on the valve stem)
Repair or replace as required
Excessive worn or mis-aligned timing chain
Out of specification valve clearances
Replace the timing chain and sprocket as required.
Worn camshaft lobes.
Replace the camshaft and valve lifters.
Engine misfire with coolant consumption
       If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. ...
    Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09214-2W100) (09231-H1100) Installation of the front oil seal A ...
    See also:

    Canister Inspection. Canister Close Valve (CCV) Specifications. Canister Close Valve (CCV) Components and Components Location. Canister Close Valve (CCV) Description and Operation
    Canister Inspection. Canister Close Valve (CCV) Specifications Canister Inspection Inspection 1. Visual inspection for the following i ...

    Troubleshooting
    Troubleshooting Symptom Suspected causes Repair Vehicle pulls to one side Front suspension fault or d ...

    Front Camera Adjustment
    Special Service Tool Tool Name / Number Illustration Description Front View Ca ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0669