Kia Sorento: Warning Messages
Shift to "P" position (for smart key system and automatic transaxle)

- This warning message illuminates if you try to turn off the engine without
the shift lever in P (Park) position.
- At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop Button once more, it will turn to the ON position).
Low Key Battery (for smart key system)

This warning message illuminates if the battery of the smart key is discharged
when the Engine Start/Stop Button changes to the OFF position.
Press start button while turn steering (for smart key system)

- This warning message illuminates if the steering wheel does not unlock normally
when the Engine Start/Stop Button is pressed.
- It means that you should press the Engine Start/Stop Button while turning
the steering wheel right and left.
Press brake pedal to start engine (for smart key system and automatic transaxle)

- This warning message illuminates if the Engine Start/Stop Button changes
to the ACC position twice by pressing the button repeatedly without depressing
the brake pedal.
- It means that you should depress the brake pedal to start the engine.
Key not in vehicle (for smart key system)

- This warning message illuminates if the smart key is not in the vehicle
when you press the Engine Start/Stop Button.
- It means that you should always have the smart key with you.
Key not detected (for smart key system)

This warning message illuminates if the smart key is not detected when you press
the Engine Start/Stop Button.
Press start button again (for smart key system)

- This warning message illuminates if you can not operate the Engine Start/Stop
Button when there is a problem with the Engine Start/Stop Button system.
- It means that you could start the engine by pressing the Engine Start/ Stop
Button once more.
- If the warning illuminates each time you press the Engine Start/Stop Button,
have your vehicle inspected by an authorized Kia dealer.
Press start button with smart key (for smart key system)

- This warning message illuminates if you press the Engine Start/Stop Button
while the warning message
Description
On this mode, you can change setting of the doors, lamps, and so on.
Door
Auto Door Lock (if equipped)...
See also:
BJ Boot Removal and Installation
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - ...
Rear Disc Brake Inspection
Rear Brake Disc Thickness Check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ...