Kia Sorento: Airbag Disposal - Airbag Module - RestraintKia Sorento: Airbag Disposal

Kia Sorento (XM, 2011-2015) Service Manual / Restraint / Airbag Module / Airbag Disposal

Special Tool Required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbags or side airbags must be deployed. If the vehicle is still within the warranty period, before deploying the airbags or side airbags, the Technical Manager must give approval and/or special instruction. Only after the airbags or side airbags have been deployed (as the result of vehicle collision, for example), can they be scrapped. If the airbags or side airbags appear intact (not deployed), treat them with extreme caution. Follow this procedure.
Deploying Airbags In The Vehicle
If an SRS equipped vehicle is to be entirely scrapped, its airbags or side airbags should be deployed while still in the vehicle. The airbags or side airbags should not be considered as salvageable parts and should never be installed in another vehicle.
1.
Turn the ignition switch OFF, and disconnect the battery negative cable and wait at least three minutes.
2.
Confirm that each airbag or side airbag is securely mounted.
3.
Confirm that the special tool is functioning properly by following the check procedure.
Driver
    Curtain Airbag (CAB) Module Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. 3. ...
    Seat Belt Pretensioner
    ...
    See also:

    Universal Joint Assembly On Vehicle Inspection
    On Vehicle Inspection 1. Check the universal joint bearing for damage or wear. 2. ...

    Basic function. Junction Turning function
    Basic function Basic functions designed to empower the Forward Collision-Avoidance Assist architecture on your Kia Sorento include: Collision Warning Emergency ...

    Filter replacement
    It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. 1. Loosen the air clean ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.055