Kia Sorento: Curtain Airbag (CAB) Module Installation - Airbag Module - RestraintKia Sorento: Curtain Airbag (CAB) Module Installation

Kia Sorento (XM, 2011-2015) Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Installation

1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty seconds.
3.
Tighten the curtain airbag mounting bolts.

Tightening torque
: 6.9 ~ 8.8 Nm (0.7 ~ 0.9 kgf.m, 5.1 ~ 6.5 lb.ft)

  
    1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the roof trim. (Refer to the Body group...
    Special Tool Required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbags or side airbags must be...
    See also:

    Oil Pan Removal
    1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the A/C compressor. (Refer to Heating, Ve ...

    Intake Manifold Removal and Installation
    1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner ...

    SRS components and functions
    The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0525