Kia Sorento: Auto Defogging Actuator Description - Heater - Heating,Ventilation And Air ConditioningKia Sorento: Auto Defogging Actuator Description

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Heater / Auto Defogging Actuator Description

The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor rpm and mode actuator.
Mode Control Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's side crash pad side cover. ...
Auto Defogging Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator ...
See also:

Theft-alarm system
This system is designed to provide protection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the "Armed" stage, the second is the "T ...

Engine And Transmission Assembly Installation
Install the other parts in reverse order of removal. Perform the following : ...

Tires/Wheels
   ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0398