Kia Optima Manuals

Kia Sorento: Balance Shaft & Oil Pump Removal - Lubrication System - Engine Mechanical SystemKia Sorento: Balance Shaft & Oil Pump Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Lubrication System / Balance Shaft & Oil Pump Removal

BSM (Balance Shaft Module) Chain System

1.
Remove the timing chain.
(Refer to Timing System in this group)
2.
Install a stopper pin (A) after compressing the balance shaft chain tensioner.
3.
Remove the balance shaft chain tensioner (B).
4.
Remove the balance shaft chain tensioner arm (C).
5.
Remove the balance shaft chain guide (D).
6.
Remove the balance shaft chain (E).
7.
Remove the BSM (Balance Shaft Module) after removing the BSM mounting bolts.
  
Do not disassemble the BSM (Balance Shaft Module).

BSM (Balance Shaft Module)

1.
Remove the under cover.
2.
Remove the RH front wheel.
3.
Drain the engine oil.
4.
Remove the A/C compressor lower mounting bolts (A).
5.
Remove the A/C compressor bracket (A).
6.
Remove the oil pan (A) after removing the bolts.
Insert the blade of SST (09215-3C000) between the ladder frame and oil pan. Cut off applied sealer and remove the lower oil pan.

  
    1. Balance shaft & oil pump assembly 2. Balance shaft chain tensioner 3. Balance shaft chain 4. Balance shaft chain sprocket 5. Balance shaft chain guide 6. Balance shaft chain ...
    BSM(Balance Shaft Module) Chain System 1. The key of crankshaft should be aligned with the mating face of main bearing cap. As a result of this, the piston of No.1 cylinde...
    See also:

    Battery saver function
    The purpose of this feature is to prevent the battery from being discharged if the lights are left in the ON position. The system automatically shuts off the parking lights 30 seconds after the ...

    Description
    The Vehicle Information System is a Telematics service that ensures comfortable and enjoyable driving by providing safety, security, and vehicle diagnostic information, with the option of usi ...

    Blind Spot Detection Unit Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") ...

    Manuals list

    Copyright © xm.ksmanual.com 2014-2026 - 0.0392