Kia Sorento: Blind Spot Detection Unit Installation
Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Unit Installation
| 1. |
Install the BSD units to the rear bumper.
|
| 2. |
Install the rear bumper.
|
| 3. |
Connect the negative (-) battery terminal.
|
|||||||||||||
Blind Spot Detection Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
3.
...
Blind Spot Detection Unit Inspection
BSD Unit Alignment
To sense the cars exactly in the next lane with the radar, the direction
of the sensor and the direction of the vehicle have to align.
This is BSD unit alignment. If...
See also:
Audio Remote Control Inspection
1.
Check for resistance between No.2 and No.7 terminals in each switch
position.
[Audio System]
Switch
Connector
terminal
...
Rear Differential Carrier Reassembly
Pinion drive gear height adjustment
Adjust the height of the drive pinion in the following order.
1.
Below are the special tools to measure the pinion height
...
Emergency Door Locking Procedures
If the electrical power door lock switch becomes completely non-functional—such as when the Kia Sorento 12-volt
battery is dead or drained—you cannot rely on standard central locking. In this ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026