Kia Sorento: Blower Motor Replacement - Blower - Heating,Ventilation And Air ConditioningKia Sorento: Blower Motor Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Motor Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger side crash pad under cover (A).

3.
Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.

4.
Install in the reverse order of removal.
Blower Motor Inspection
1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good ...
Blower Resistor Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After ...
See also:

Master Cylinder Components and Components Location
Components 1. Reservoir cap2. Reservoir3. Master cylinder 4. Brake booster5. Push rod6. Vacuum sensor ...

Service Data
Service Data Engine Control System Accelerator Position Sensor (APS) Accelerator Position Output Voltage (V) [Vr ...

Closing the tailgate
To close the tailgate, lower and push down the tailgate firmly. Make sure that the tailgate is securely latched. WARNING Make sure your hands, feet and other parts of your body are safely out of ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0537