Kia Sorento: Ignition Coil Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Ignition System / Ignition Coil Removal

1.	Disconnect the battery nagative terminal.

2.	Remove the engine cover.

3.

Disconnect the ignition coil connector (A).

•	When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.	Remove the ignition coil (A).

Ignition Coil Circuit Diagram

...

Ignition Coil Installation

1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)...

See also:

Removal
1. Remove the engine cover. (Refer to Engine Mechanical System - "Engine cover") 2. Remove the air cleaner assembly and air du ...

Heater & A/C Control Unit (Manual) Component
Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 IG ...

Rear Wiper Motor Installation
1. Install the rear wiper motor assembly. Tightening torque Nut : 7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft) ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026