Kia Sorento: Brake Line Inspection - Brake System - Brake SystemKia Sorento: Brake Line Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / Brake System / Brake Line Inspection

1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake hoses for cracks, damage and fluid leakage.
3.
Check the brake tube flare nuts for damage and fluid leakage.
4.
Check brake hose mounting bracket for crack or deformation.
Brake Line Removal
1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with ...
Brake Line Installation
1. Installation is the reverse of removal.    Use a new washer (A) whenever installing....
See also:

Checking the washer fluid level
The reservoir is translucent so that you can check the level with a quick visual inspection. Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be use ...

Highway Driving Assist
Display and control The operational status of the Highway Driving Assist system in your Kia Sorento is clearly visible within the dedicated Driving Assist view on the vehicle's instrument clus ...

Front Stabilizer Bar Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0558