Kia Sorento: Brake Pedal Adjustment - Brake System - Brake SystemKia Sorento: Brake Pedal Adjustment

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / Brake System / Brake Pedal Adjustment

Brake Pedal Height and Free Play
1.
Disconnect the stop lamp switch connector (A) and loosen the stop lamp switch lock nut.

2.
Adjust the brake pedal height (A) as illustration below.

Pedal height : 271 mm (10.67 in)

3.
Adjust the stop lamp switch clearance (B) and brake pedal free play.

Stop lamp clearance: 1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Pedal free play: 3.0 ~ 8.0 mm (0.12 ~ 0.31 in)

  
Adjust the brake pedal free play using the stop lamp switch lock nut.
4.
Connect the stop lamp switch connector.
Brake Pedal Installation
1. Pre-tighten the bracket fixing bolt (A) in dash panel. 2. Install the brake booster and brake pedal member fixing nuts (A) securely. ...
Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer...
See also:

Seat Belt Buckle Switch (BS) Installation
   Be sure to install the harness wires not to be pinched or interfered with other parts. 1. ...

Adjusting instrument cluster illumination
To fine-tune the backlight brightness of your Kia Sorento instrument panel, press the illumination control buttons (“+” or “-”) while the ignition switch or ENGINE START/S ...

Navigation-based Smart Cruise Control limitations
In certain driving environments or technical scenarios, the advanced Navigation-based Smart Cruise Control system equipped in your Kia Sorento may occasionally exhibit irregular, unexpected, or l ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0741