Kia Sorento: Cooling Fan Disassembly - Cooling System - Engine Mechanical SystemKia Sorento: Cooling Fan Disassembly

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Disassembly

1.
Remove the cooling fan (A) after loosening the screws (B) from the cooling assembly.

Tightening torque:
2.7 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.0 ~ 2.3 lb-ft)

2.
Remove the fan motor (B) after loosening the screws (A) from the cooling fan shround.

Tightening torque:
3.9 ~ 5.8 N.m (0.4 ~ 0.6 kgf.m, 2.8 ~ 4.3 lb-ft)

3.
Install in the reverse order of removal.
Cooling Fan Removal and Installation
Cooling Fan Assembly 1. Disconnect the battery terminals. 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System...
Reservoir Tank Removal and Installation
1. Remove the over flow hose(A). 2. Remove the reservoir tank(B) after loosening the bolts. Tightening torque: 7.8 ~...
See also:

SS-B Solenoid Valve(ON/OFF)
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

Sirius TM Radio
Using Sirius TM Satellite Radio Your Kia vehicle is equipped with a 3 month complimentary period of SIRIUSTM Satellite Radio so you have access to over 130 channels of music, information, and enter ...

Description
Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0462