Kia Sorento: Cooling Fan Removal and Installation - Cooling System - Engine Mechanical SystemKia Sorento: Cooling Fan Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Removal and Installation

Cooling Fan Assembly
1.
Disconnect the battery terminals.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
3.
Remove the under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
4.
Remove the front bumper cover.
(Refer to Body - "Front Bumper cover")
5.
Disconnect the over flow hose (A) from the radiator.

6.
Remove the air intake shield (A) after loosening the screws (B).

7.
Remove the side air guard (A).
[LH]

[RH]

8.
Remove the upper air guard(B) after loosening the mounting screws (A).

Tightening torque:
1.8~2.4 N
    1. Remove the cooling fan (A) after loosening the screws (B) from the cooling assembly. Tightening torque: 2.7 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2....
    See also:

    Manifold Absolute Pressure Sensor (MAPS) & Intake Air Temperature Sensor (IATS) On Vehicle Inspection
    On Vehicle Inspection 1. The engine control system can be more quickly diagnosed for problems with the KDS. (Refer to "DTC ...

    License Lamps Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens (A) from the panel after loosening a screw. ...

    Vehicle Stability Management (VSM) system. Trailer Stability Assist (TSA) system
    Vehicle Stability Management (VSM) system The Vehicle Stability Management (VSM) system works in harmony with the Electronic Stability Control and Motor-Driven Power Steering to further enhance ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0542