Kia Sorento: Reservoir Tank Removal and Installation - Cooling System - Engine Mechanical SystemKia Sorento: Reservoir Tank Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cooling System / Reservoir Tank Removal and Installation

1.
Remove the over flow hose(A).
2.
Remove the reservoir tank(B) after loosening the bolts.

Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

3.
Install in the reverse order of removal.
Cooling Fan Disassembly
1. Remove the cooling fan (A) after loosening the screws (B) from the cooling assembly. Tightening torque: 2.7 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2....
Water Temperature Control Assembly Components
1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant hose...
See also:

Audio Remote Control Circuit Diagram
...

Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extra ...

Tire Pressure Monitoring System (TPMS)
The advanced Tire Pressure Monitoring System (TPMS) continuously tracks the pneumatic pressure of your Kia Sorento tires, delivering real-time telemetry straight to the instrument cluster display. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0535