Kia Optima Manuals

Kia Sorento: CVVT & Camshaft Removal - Cylinder Head Assembly - Engine Mechanical SystemKia Sorento: CVVT & Camshaft Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cylinder Head Assembly / CVVT & Camshaft Removal

1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Set No.1 cylinder to TDC/compression.
A.
Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover.
B.
Check that the mark(A) of the CVVT sprockets are in straight line on the cylinder head surface as shown in the illustration.
If not, turn the crankshaft one revolution (360
    (1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...
    Continuously variable valve timing (CVVT) Assembly 1. Inspect the CVVT for smooth rotation. (1) Clamp the camshaft using a vise. Be carefu...
    See also:

    Positive Crankcase Ventilation (PCV) Valve Operation Principle
    ...

    Intake Manifold Components
    1. Intake manifold assembly 2. Electronic throttle body 3. Intake manifold stay 4. Intake manifold gasket ...

    Emergency Fastening Device (EFD) Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

    Manuals list

    Copyright © xm.ksmanual.com 2014-2026 - 0.0306